Solid Content: 45%-55% (Adjustable on demand)
Viscosity (25℃): 500-5000 mPa·s (NDJ-1 rotational viscometer, 25℃)
pH Value: 7.0-9.0 (Weakly alkaline, good stability)
Product Introduction
Styrene-acrylic emulsion is a water-based polymer prepared by emulsion polymerization of styrene and acrylate monomers. With excellent adhesion, water resistance, weather resistance, film-forming property and cost advantage, it has become the core environmental raw material in the coating industry. As a professional trader, we focus on acting for well-known manufacturers like Badefu, Baolijia and Wanhua, integrating full-range resources to meet your needs in one stop.
Core Common Advantages
The styrene-acrylic emulsions we all follow high industry standards, combining environmental protection and practicality, with core advantages covering the whole product line:
•Environmentally friendly and compliant: With water as the dispersion medium, no harmful benzene solvents, VOC is much lower than industry standard, no pungent odor, safe and non-toxic, complying with environmental requirements, suitable for high-standard scenarios.
•Strong adhesion and good film-forming: Can closely combine with various substrates like concrete, wood, metal, high bonding strength, not easy to peel; uniform and dense film, with flexibility and wear resistance, effectively improving downstream product quality.
•Weather and corrosion resistance, stable performance: Excellent water, alkali and UV resistance, no yellowing or powdering for long-term outdoor use, can resist moisture and acid-base erosion, adapting to different regions, long service life.
•Convenient construction and strong compatibility: Good fluidity, supports brushing / rolling / spraying, high efficiency; excellent compatibility with additives and fillers, flexible formula adjustment, adapting to different production processes.
•High cost performance and wide application: Higher cost performance compared with pure acrylic and polyurethane emulsion, stable performance, adapting to mass production and small-batch customization, wide application.
General Product Parameters
The following are the general basic parameters of styrene-acrylic emulsion. Different product categories (waterproof, weather-resistant, low-VOC, etc.) can be adjusted on this basis:
| Parameter Name | Parameter Value |
|---|---|
| Product Type | Water-based styrene-acrylic emulsion (single component) |
| Appearance | Milky white or light blue viscous liquid, no caking, no obvious precipitation, uniform color |
| Solid Content | 45%-55% (Adjustable on demand) |
| Viscosity (25℃) | 500-5000 mPa·s (NDJ-1 rotational viscometer, 25℃) |
| pH Value | 7.0-9.0 (Weakly alkaline, good stability) |
| Minimum Film Formation Temperature (MFFT) | 0-28℃ |
| VOC Content | Regular model ≤50g/L, low-VOC model ≤10g/L (complying with environmental protection standards) |
| Shelf Life | 6-12 months (sealed and stored in a cool and dry place, avoiding exposure to sunlight and freezing) |
| Construction Temperature | 5-35℃ (humidity ≤85%, no standing water on the substrate) |
| Packaging Specification | 50kg / bucket, ton barrel packaging |
Product Application Scenarios
Relying on the full-range advantages, our styrene-acrylic emulsion focuses on serving the coating industry, adapting to: Interior wall latex paint, exterior wall latex paint, real stone paint, texture paint, waterproof paint, wood paint and other coating production needs.
Common FAQ (Frequently Asked Questions)
1. Product Selection
Q: I'm not sure which styrene-acrylic emulsion is suitable for my production needs. How should I choose?
A: According to your industry scenario, core needs and production process, we will accurately match the suitable product for you; we can also provide free samples for trial, solving the selection problem in one stop.
Q: Can your emulsion be used for outdoor production?
A: Yes, we have special weather-resistant products, added with anti-aging and anti-UV additives, no yellowing or powdering for long-term outdoor use, and we can customize the weather resistance to adapt to various outdoor products.
2. Product Use
Q: Do I need to dilute the emulsion before use? Is there a requirement for the dilution ratio?
A: It can be used directly normally. If you need to adjust the viscosity, you can dilute it with clean water, the ratio is recommended not to exceed 20%, stir well after dilution to avoid stratification.
Q: What are the construction methods? How long does it take to form a film?
A: Supports brushing / rolling / spraying / scraping; surface drying time is 2-4 hours at normal temperature (25℃), actual drying is 12-24 hours, complete film formation takes 48-72 hours, adjustable according to temperature and humidity.
Q: What should I do if the emulsion stratifies or agglomerates during use?
A: Check the storage environment first (avoid exposure and freezing); slight stratification can be used after stirring; serious agglomeration means the emulsion has deteriorated, stop using it, we will provide after-sales solutions.
3. Purchase and Storage
Q: What is the MOQ? Is there a discount for bulk purchase?
A: No strict MOQ, small-batch trial is supported (starting from 1 bucket); bulk purchase can enjoy step discounts, and we provide stable supply guarantee to meet long-term production needs.
Q: How to store the emulsion? What are the effects of improper storage?
A: It should be sealed and stored in a cool, dry and ventilated place, temperature controlled at 5-35℃, avoid exposure, rain and freezing; improper storage will lead to emulsion stratification and deterioration.
Q: What should I do if there is a quality problem?
A: If there is a quality problem, contact us in time, provide relevant instructions, we will arrange technical personnel to connect, provide return, replacement or technical solutions to protect your rights.
Our Advantages and Commitments
As a professional styrene-acrylic emulsion trader, we focus on acting for well-known manufacturers, providing customers with comprehensive guarantee with full-range resources and perfect service:
•Full range coverage: All types of emulsions are available, one-stop procurement, meeting the needs of customers in different industries, scenarios and budgets;
•Strict quality control: Implement strict quality inspection standards throughout the process, ensuring stable performance and qualified quality of each batch;
•Supply chain advantage: Relying on the R&D strength of top manufacturers, direct factory supply, products keep up with industry trends, adapting to various production needs;
•Intimate service: Provide one-stop services such as technical guidance, sample trial, bulk supply and after-sales follow-up, solving production problems in time;
•Cost performance advantage: Direct factory supply channel, bulk purchase reduces costs, providing you with cost-effective products from well-known manufacturers, improving your product competitiveness.
We deeply cultivate the styrene-acrylic emulsion trading field, adhere to customer demand as the core, and become your long-term trusted partner with full range, high-quality products and intimate service, helping your career develop.
Contact Us
We focus on providing high-quality styrene-acrylic emulsion solutions for global purchasers, supporting bulk procurement and OEM/ODM customization, providing full English technical support.
•Email: [email protected]
•Phone: +86-15004035351
Welcome to consult and negotiate, we will wholeheartedly provide you with suitable styrene-acrylic emulsion solutions to meet all your needs!
No. 5, Shaming Road, Yuhong District, Shenyang City, Liaoning Province, P.R. China
With our comprehensive coating products, we bring you a unique and beautiful architectural vision.
EN
